Valve cover gasket set 2019+, flat-cut silicone

Pair of flat-cut silicone valve cover gaskets, fits all Ural 750 engines 2019 and later.

Note that the top is slightly curved and the bottom has a bit of a flat to it. Better to install them right-side-up.

Torque spec printed by Real Gaskets is wrong because they copied it from the BMW airhead valve cover design, and this gasket hasn't been corrected on their website. But aim for 2.1-2.5 Nm per bolt, 20-22 in-lb 1.7-1.8 ft-lb. If you don't have a torque wrench that works that low, you're not alone! Just go finger tight plus a little, or whatever other method you can think of to limit the torque you put into the four bolts.

If you over-tighten, the gasket will either split or squeeze out of the joint or both. If you don't clean both mating surfaces to be totally free of residual oil, the gasket will squeeze out.

If you’re careful and follow the other instructions, these can last a long time. That said, we don’t plan to restock them.